GreenCUBE 3D-Carrier

Setting vertical farming in motion: the Greencube 3D-Carrier

The GreenCube automated vertical farming system makes large scale urban farms feasible! The 3D-Carriers are the core component of this system.

The 3D-Carriers are the robotized semi-autonomous shuttles that make the GreenCube automated vertical farm possible.

Fully designed and built in-house, the 3D-Carrier is a ground-breaking logistics solution that reduces the costs of a fully automated vertical farm compared to conventional automation equipment, while increasing the flexibility and modularity of the warehouse.

Using this ground-braking technology, large scale automated vertical farms finally become financially feasible.

The U.N. projects that food production needs to increase by around 60% until 2050 in order to feed the growing global population.

The goal of our design was to make a truly sustainable vertical farming system, from both an environmental point of view as well as from a financial stand point.
To do this we designed the GreenCube steel structure with standardised components used for pallet storage systems and iCube systems.
Next, when it came time to design the automation equipment we continued focusing on equipment standardisation.
By using only 3D-Carrier’s that can move throughout the entire GreenCube and Vertical Transporters (VT) for movement between layers we managed to keep the logistical design of the GreenCube brilliantly simple.

Since the 3D-Carrier and the VT’s use only their own sensors, there’s no need for other sensors in the GreenCube.

The GreenCube handels all the bench movements using only 3D-Carriers en Liften.

The Logiqs 3D-Carriers and Lifts as well as the X-tracks (side movement tracks between aisles for the 3D-carriers) are extremely compact, and have a low impact on the overall storage capacity of the warehouse.

The Logiqs software also makes all picking strategies possible, allowing for full usage of the available storage lanes. Our software can also be configured to automatically reorganise lots in down time, so that benches are already prepared for harvesting without user input being needed.

The 3D-Carriers and Lifts don’t exert high movement forces on the racking, and this means that the GreenCUBE can also be implemented in existing buildings without major building structural changes.

The scaling of an GreenCUBE system also benefits from the modular lightweight design, bringing the implementation costs of extensions to the system down.

One of the main advantages of a GreenCUBE vertical farm is the increased safety when to conventional manual vertical farms where workers often need to perform labour at unsafe heights .

Safety zones can also be configured in the GreenCUBE, so that the 3D-Carriers can keep executing tasks in the rest of the farm, while a certain zone of the warehouse becomes no-limit to the 3D-Carriers.

Dat-A-Control

The GreenCUBE is controlled with our own Dat-A-Control, through which all equipment is controlled automatically.

Transport tasks can either be given automatically by the company’s ERP system, or tasks can be entered by an operator using the Dat-A-Control intuitive graphical user interface.

Dat-A-Control uses advanced algorithms to manage the GreenCUBE automatically and control inbound and outbound bench transfers without the need for user interference for each individual machine operation.

Task priority, task scheduling, reorganise tasks as well as complex transport plans can all be easily controlled using our intelligent control and registration software.

Our software can be configured according to the needs of the farm and automatic protocols can be set for reorganising pallets during down-time, preparing them for harvesting according to the pending outbound shipment orders.

  • Lifting capacity: up to 2.000 Kg
  • Security sensors: foto cells
  • Movement speed: 0,25 m/s
  • 3D-Carrier and pallet transport : apart and simultaneously
  • Working temperature : -25°C to +40°C
  • Multiple lifting frames : yes (optional)
  • Actuator power: 6 kW
  • Frame: galvanised steel
  • Maximal hight : 40 meter
  • Service interval: 6 months

The automated bench cleaning solutions from Logiqs featuring work in conjunction with our Dat-A-Control software so that operation of the machines is fully automatic without requiring worker intervention.

Growers can fully personalise their work-flow using Dat-A-Control and take advantage of our many useful features such as: Transport plants for multiple benches and multiple transfers, locations with job triggers, automate movements to the work area according to potting date, etc.

Get in touch with us!
Our team of enthusiastic professionals is looking forward to assist you with your logistics challenges.

Logiqs automation equipment stands the test of time!

We’ve delivered hundreds of fully automated rolling bench systems worldwide and worked with some of the worlds most successful growers of potted plants, orchids, young plants, bulb flowers, small trees, cut flowers, cress/microgreens and vegetables.

Well maintained systems installed by us more than 30 years ago are still in operation today!